How to Flash or Install Firmware on Samsung GALAXY V With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY V. This device Is Also called Samsung Galaxy V Dual SIM G313HZ, On this guide we will explain to you how to Flash or Install a new Firmware on Samsung GALAXY V With ODIN v3.Eleven.1. We especially endorse you to upgrade your Samsung Galaxy V software program using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies, follow this manual best in case you certain 99,ninety nine% about risks concerned in flashing your Samsung GALAXY V tool.

This device is launched in 2014, September. Samsung GALAXY V is the telephone with four,0 Inches TFT capacitive touchscreen, 16M hues, work on Android OS, v4.4.2 (KitKat), Powered through Quad-middle 1.2 GHz CPU, blended with 512 MB of RAM and 3.15 MP of Main digital camera and VGA on secondary digital camera.

Prerequisite.

Below is the subsequent belongings you must do before flashing your Android Samsung GALAXY V tool.

1. Make sure your Samsung GALAXY V is completely charged. Or minimum has 89% of battery ability. It will avoid the flashing failure manner.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing tool.
3. Make sure you've got mounted a modern of the Samsung driver, that guide together with your device If you do not have, you could download here
4. Original USB cable driver on your Samsung GALAXY V.
5. Download Odin V3.11.1, Here .
6. Firmware Download. (use one of the 3 techniques under to down load Samsung Firmware)
• One . Download Official firmware document for the model number of your tool, download it from - SamMobile, or you could go to samsung-updates.Com/
• Two . Guide How to Download Official Samsung Firmware From SamMobile. Here
• Three. Firmware Samsung GALAXY V, you should Log In to download firmware through this link.
• SM-G313HZ - Nepal, Cambodia, Indonesia, Vietnam, Philippines, Malaysia, Bangladesh, - Here

Guide To Flash Samsung GALAXY V

1. You must down load all necessary report. (Samsung USB motive force and Odin)
2. Then, set up all driver for your computer or PC.
3. Extract Odin V3.11.1. File at the destination folder.
4. Switch Off your Samsung GALAXY V to begin flashing method.
5. Then, run Odin3 v3.Eleven.1 via right click on on Odin.Exe and select Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY V

6. When the program is walking, now you could click AP, and navigate to the *.tar or *.Tar.Md5 firmware record.

   Flash Stock Firmware On Samsung GALAXY V

7. Now your firmware document has been inserted in Odin3

   Flash Stock Firmware On Samsung GALAXY V

8. Then, Enter download mode your Samsung GALAXY V. See this guide a way to do it.
9. On this mode, now connect your Samsung GALAXY V on your PC / pc using a USB cable.
10. After your phone connected, you'll see a message seem that show your device introduced and there may be data at the ID: COM at top left corner. Keep in mind for this COM range relying on the PC / Laptop. Just Ignore all, on this image you'll see that your device is detected on (COM five)

    Port Com Samsung GALAXY V

11. Make sure re-partition is NOT ticked
12. When the whole thing already you may click on Start Button. at the bottom left corner
13. Just anticipate the method to run approximately 2-5 minutes, and ensure there is no interference on this process.
14. When complete it will show a notification PASS and your telephone Samsung GALAXY V will routinely restart.
15. Wait for your device in addition up, it's going to take some time.
16. When your Samsung GALAXY V is ready to apply, now check your firmware model. See this guide how to test it.
17. Finish.