How to Flash / Install Firmware Samsung GALAXY S7 EDGE Using ODIN v3.11.1 | Guide.

How to Flash / Install Firmware Samsung GALAXY S7 EDGE Using ODIN v3.Eleven Guide.

Flash Stock Firmware Samsung GALAXY S7 EDGE. This device is known as Samsung Galaxy S7 edge Duos with dual-SIM card slots. The versions of this tool are; G935F (Global); G935FD (Southeast Asia), G935 (USA). And now we can show you how to flash or installation a new firmware on this tool. If you want to improve your Samsung GALAXY S7 EDGE firmware, we endorse the use of Samsung’s personal utilities OTA (Over-the-air) or Samsung Kies. Observe this guide simplest in case you recognize about dangers involved in flashing your Samsung GALAXY S7 EDGE device. On this guide, we flash Samsung device the use of ODIN v3.Eleven.1.

This device is released on 2016, March. Samsung GALAXY S7 EDGE is the cellphone with 5,five Inchi Super AMOLED capacitive touchscreen, 16M colorings, work on Android OS, v6.0 (Marshmallow), Supported with QQuad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, blended with 4000 MB of RAM and 12 MP of Main digital camera and five MP on secondary digicam.

Preparation.

Below is the following belongings you must do before flashing your Android Samsung Smartphone device.

1. Make positive your Samsung GALAXY S7 EDGE is absolutely charged. Or minimal has 88 % of battery ability. It will keep away from the flashing technique failure.
2. Flashing system will delete or wipe all records stored in internal memory. So, bear in mind to backup all records earlier than flashing tool.
3. Make sure you've got mounted a contemporary of the Samsung motive force, that guide with your device, If you don't have, you may down load here
4. Original USB cable driver to your Samsung GALAXY S7 EDGE.
5. Download Odin V3.Eleven.1, Here
6. Download Official firmware record for the model range of your tool, download it from - SamMobile, or you may go to samsung-updates.Com/
7. Or you may read Guide How to Download Official Samsung Firmware From SamMobile. Here
8. Firmware Samsung GALAXY S7 EDGE, you should Log In to down load firmware via this hyperlink.
• SM-G935F - Global. Here
• SM-G935FD - India, Sri Lanka, Nepal, Bangladesh, Singapore, Malaysia, Thailand - Here .

Guide To Flash Samsung GALAXY S7 EDGE

1. You should download all necessary document. (Samsung USB motive force and Odin)
2. Then, set up all driving force to your pc or PC.
3. Extract Odin V3.Eleven.1. File on the vacation spot folder.
4. Switch Off your Samsung GALAXY S7 EDGE to begin flashing method.
5. Then, run Odin3 v3.Eleven.1 via proper click on Odin.Exe and select Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY S7 EDGE

6. When the program is jogging, now you can click on AP, and navigate to the *.tar or *.Tar.Md5 firmware report.

   Flash Stock Firmware On Samsung GALAXY S7 EDGE

7. Now your firmware report has been inserted in Odin3
8. Then, Enter download mode your Samsung GALAXY S7 EDGE. See this guide a way to do it.
9. On this mode, now join your Samsung GALAXY S7 EDGE to your PC / pc using a USB cable.
10. After your smartphone linked, you may see a message seem that display your tool brought and there may be information at the ID: COM at top left corner. Keep in thoughts for this COM range relying on the PC / Laptop. Just Ignore all, in this photo you'll see that your device is detected on (COM five)

    Port Com Samsung GALAXY S7 EDGE

11. Make certain re-partition is NOT ticked
12. When the whole thing already you could click Start Button. at the bottom left corner
13. Just watch for the manner to run about 2-five mins, and make certain there is no interference on this manner.
14. When entire it'll display a notification PASS and your phone Samsung GALAXY S7 EDGE will routinely restart.
15. Wait for your tool in addition up, it's going to take some time.
16. When your Samsung GALAXY S7 EDGE is prepared to apply, now test your firmware model. See this guide how to test it.
17. Finish.