Guide to Flash New Firmware Samsung GALAXY J2 With ODIN v3.11.1

Guide to Flash New Firmware Samsung GALAXY J2 With ODIN v3.Eleven.1

Flash Stock Firmware Samsung GALAXY J2. This Guide will show you how to Flash / Install Firmware Samsung GALAXY J2 Using ODIN v3.11.1. There are some versions, of this device, J200H and not using a LTE (South Africa, Kazakhstan), J200GU (Philippines, Malaysia, Thailand), J200Y (New Zealand, Taiwan); J200G (India, Indonesia), J200F (UAE, Turkey). Upgrade your Samsung GALAXY J2 firmware the usage of Samsung’s very own utilities OTA (Over-the-air) or Samsung Kies handiest. Use this manual handiest in case you understand or sure ninety six% about dangers involved in flashing your Samsung GALAXY J2 device.

This device is released in 2015, September. Samsung GALAXY J2 is the telephone with four,7 Inch Super AMOLED capacitive touchscreen, 16M colorings, work on Android OS, v5.1.1 (Lollipop), Powered by using Quad-center 1.3 GHz Cortex-A7 CPU, Exynos 3475 Quad Chipset, Mali-T720 GPU, combined with 1 GB of RAM and 5 MP of Main camera and a couple of MP on secondary camera.

Pre Requisite.

Below are the subsequent stuff you have to do before flashing your Android Samsung Smartphone device.

1. Make certain your Samsung GALAXY J2 is completely charged. Or minimal has 93% of battery ability. It will avoid the flashing procedure failure.
2. Flashing method will delete or wipe all records saved in internal reminiscence. So, don't forget to backup all records earlier than flashing tool.
3. Make certain you have set up a brand new of the Samsung driving force, that support along with your device If you do not have, you could down load here
4. Original USB cable motive force for your Samsung Galaxy J2.
5. Download Odin V3.Eleven.1, Here .
6. Firmware Download. (use one of the three strategies beneath to down load Samsung Firmware)
• One . Download Official firmware record for the model wide variety of your device, down load it from - SamMobile, or you could visit samsung-updates.Com/
• Two . Guide How to Download Official Samsung Firmware From SamMobile. Here
• Three. Firmware Samsung Galaxy J2, you need to Log In to download firmware through this link beneath.

Guide To Flash Samsung GALAXY J2

1. You have to down load all necessary record. (Samsung USB driving force and Odin)
2. Then, install all motive force for your laptop or PC.
3. Extract Odin V3.11.1. File in the destination folder.
4. Switch Off your Samsung GALAXY J2 to start flashing technique.
5. Then, run Odin3 v3.11.1 by way of proper click on Odin.Exe and pick Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY J2

6. When the program is jogging, now you could click AP, and navigate to the *.tar or *.Tar.Md5 firmware file.

   Flash Stock Firmware On Samsung GALAXY J2

7. Now your firmware record has been inserted in Odin3

   Flash Stock Firmware On Samsung GALAXY J2

8. Then, Enter download mode your Samsung GALAXY J2. See this guide a way to do it.
9. On this mode, now join your Samsung GALAXY J2 in your PC / pc the usage of a USB cable.
10. After your smartphone related, you'll see a message seem that show your tool introduced and there's information at the ID: COM at pinnacle left corner. Keep in thoughts for this COM vary relying at the PC / Laptop. Just Ignore all, on this picture you may see that your tool is detected on (COM 5)

    Port Com Samsung GALAXY J2

11. Make sure re-partition is NOT ticked
12. When everything already you may click Start Button. at the bottom left corner
13. Just look forward to the system to run approximately 2-five minutes, and make sure there's no interference on this procedure.
14. When entire it will show a notification PASS and your cellphone Samsung GALAXY J2 will automatically restart.
15. Wait your tool as well up, it's going to take some time.
16. When your Samsung GALAXY J2 is ready to apply, now test your firmware model. See this guide how to check it.
17. Finish.