Guide to flash LG V10 H900 (AT&T), H901 (T-Mobile), VS990 (Verizon) using TOT method

Guide to flash LG V10 H900 (AT&T), H901 (T-Mobile), VS990 (Verizon) the use of TOT technique.

Flash LG V10 H900, H901, VS990. Today guidebelajar will proportion a guide to flash LG V10 the usage of TOT approach. Actually, you can carry out flash on LG Android cellphone use any technique, like the usage of KDZ technique and TOT approach. So, it relies upon on you to apply which technique. When your LG Device were given bootloop or bricked, or many errors on Android device you may use this technique to flash or installation a brand new firmware for your device.

Before you still perform a flashing on LG V10 device, you ought to ensure your Android tool has a characteristic like this. LG V10 is the cellphone with 5,7 Inchi wide IPS LCD capacitive touchscreen, 16M hues, work on Android OS, v5.1.1 (Lollipop), Chipset Qualcomm MSM8992 Snapdragon 808 and supported with Quad-middle 1.44 GHz Cortex-A53 & dual-middle 1.Eighty two GHz Cortex-A57 CPU, combined with 4 GB of RAM and sixteen MP of Main camera and 5 MP on secondary camera.

Ok, now observe this guide the way to flash your LG V10 the usage of TOT method. And recall, do it along with your own chance.

Tool to Flash LG V10.

To flash your LG V10 , you should have this tools.

1. Download Drivers (Any LG Phone) -
• Here (for Verizon Only)
• Here
2. Then, Download LG FlashTools V1.Eight.
3. Download Both Stock Image & DLL File.
4. Download Megalock DLL File.

Guide to flash LG V10.

1. First, you need to install LG driver to your computer
2. Then, install flash tool in your PC or laptop, however don't run this software yet.
3. Now, extract TOT report from the ZIP. Put on the desired folder to your computer.
4. Then, Power off your device. By way of the press and hold the electricity button for a 2d, and launch button whilst LG V10 vibrate.
5. Now, Press and hold the Volume UP button and plug within the USB cable in your phone you ought to now see “Firmware Update/Download Mode” and be in Download mode.
6. Now, Open device manager
• click start
• right click on on my computer
• select properties
• This will open System windows
• click device manager
• Then click on "Ports (COM & LPT)". If a driver is mounted properly, you may see "
LGE Mobile USB Serial Port (COM) "

flash LG V20 stock ROM

7. Then you could Double-click on on " LGE Mobile USB Serial Port (COM) "
8. Click Port Settings > Advanced > beside the "COM Port Number:" choose "COM11",

flash LG LG MAGNA H502F inventory ROM

9. Now, Disconnect the USB cable, wait a few seconds after which plug it in again to make sure the drivers no hassle.
10. Next step is Install LG Flash Tool , however go away it don't open this software.
11. On the LG Flash Tool Folder, there may be a report " MegaLock.Dll ", right-click the file after which replica and paste into LG Flash Tool set up folder, normally, you could find this folder in C: LG LGFlashTool then replaces the authentic record.
12. Now you can Run Flash Tool, check the Select Manual Mode, (1).



LG flash tool

13. Click on "..." to the .Dll file that is inside the folder, LG Flash Tool. (2)
14. Set S / W to stock firmware downloaded report .Tot (three)
15. Then pick out UPGRADE DL.
16. Now you can click the Start button with " Yellow Arrow" sign,

start button, flash LG LG MAGNA H502F inventory ROM

17. If you see READY!!, then reconnect your phone. Then "Waiting for Connection" text will appear within the COM41 window.

READY message on LG flash tool

18. Disconnect a USB Cable for a few seconds after which reconnect once more.
19. After your USB Cable is connected, your smartphone will flash,
20. During the flashing manner, the phone will reboot itself and will display " MiniOS Factory Reset Status ". Sometimes it came about at eighty% of the process then LG V10 will shut off, don't worry about it.
21. You can leave this process
22. Just go away it, and then it will say "PASS !!" on display screen.



Pass Message on LG flash tool



23. Its mean flashing system is completed and successful.
24. Disconnect a cable and remove the batteries,
25. For a few seconds re-insert the battery and flip On your LG V10.
26. If your LG V10 does no longer pass to show on. You can turn it on via urgent the Power button and Volume Down (-), until you may see the LG Release Button and Factory Reset, pick out reset and then the smartphone will reboot and begins generally.