Guide to Flash / Install New Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY NOTE EDGE. There are a few versions of this tool, N915K/N915L/N915S (Korea), N915D (Japan), N915FY (Europe), N915G (Singapore, Australia, Spain), N915A (AT&T), N915T (T-Mobile), And now we will show you how to Flash or Install a brand new Firmware on Samsung GALAXY NOTE EDGE With ODIN v3.11.1. We surprisingly advocate you the use of Samsung’s very own utilities OTA (Over-the-air) or Samsung Kies to upgrade your software program tool. Use this manual only in case you positive ninety eight,1% approximately dangers involved in flashing your Samsung GALAXY NOTE EDGE tool.

This device is launched in 2014, September. Samsung GALAXY NOTE EDGE is the phone with five,6 Inches Super AMOLED capacitive touchscreen, 16M colorings, paintings on Android OS, v4.4.4 (KitKat), upgradable to v6.Zero (Marshmallow), Powered with the aid of Quad-middle 2.7 GHz Krait 450 CPU, Qualcomm Snapdragon 805 chipset, Adreno 420 GPU, mixed with three GB of RAM and 16 MP of Main digital camera and three,7 MP on secondary camera.

Prerequisite.

Below are the subsequent belongings you ought to do before flashing your Android Samsung GALAXY NOTE EDGE tool.

1. Make positive your Samsung GALAXY NOTE EDGE is absolutely charged. Or minimum has 78% of battery potential. It will avoid the flashing failure procedure.
2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing tool.
3. Make sure you've got installed a latest of the Samsung driver, that assist along with your tool If you don't have, you could down load here
4. Original USB cable motive force in your Samsung GALAXY NOTE EDGE.
5. Download Odin V3.11.1, Here .
6. Firmware Download. (use one of the three techniques beneath to down load Samsung Firmware)
• One . Download Official firmware record for the version quantity of your device, download it from - SamMobile, or you can go to //samsung-updates.Com/
'
• Two . Guide How to Download Official Samsung Firmware From SamMobile. Here
• Three. Firmware Samsung GALAXY NOTE EDGE, you must Log In to download firmware via this link below.

Guide To Flash Samsung GALAXY NOTE EDGE

1. You need to download all necessary file. (Samsung USB motive force and Odin)
2. Then, set up all driving force to your pc or PC.
3. Extract Odin V3.11.1. Document in the vacation spot folder.
4. Power Off your Samsung GALAXY NOTE EDGE to begin flashing procedure.
5. Then, run Odin3 v3.11.1 by proper click on Odin.Exe and choose Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY NOTE EDGE

6. When this system is jogging, now you could click on AP, and navigate to the *.tar or *.Tar.Md5 firmware file.

   Flash Stock Firmware On Samsung GALAXY NOTE EDGE

7. Now your firmware file has been inserted in Odin3

   Flash Stock Firmware On Samsung GALAXY NOTE EDGE

8. Then, Enter down load mode your Samsung GALAXY NOTE EDGE. See this guide a way to do it.
9. On this mode, now connect your Samsung GALAXY NOTE EDGE for your PC / pc the use of a USB cable.
10. After your cellphone linked, you'll see a message appear that display your device added and there may be information on the ID: COM at pinnacle left nook. Keep in mind for this COM range relying on the PC / Laptop. Just Ignore all, in this photograph you may see that your device is detected on (COM five)

    Port Com Samsung GALAXY NOTE EDGE

11. Make sure re-partition is NOT ticked
12. When the whole lot already you could click the Start Button. at the bottom left corner
13. Just watch for the process to run about 2-five minutes, and ensure there is no interference on this method.
14. When complete it will show a notification PASS and your telephone Samsung GALAXY NOTE EDGE will robotically restart.
15. Wait in your tool in addition up, it will take a while.
16. When your Samsung GALAXY NOTE EDGE is prepared to use, now check your firmware version. See this guide how to check it.
17. Finish.