Guide to Flash / Install Firmware Samsung GALAXY V PLUS Using ODIN v3.11.1

Guide to Flash / Install Firmware Samsung GALAXY V PLUS Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY V PLUS. This tool Is Also referred to as Samsung Galaxy V+ G318, This Guide will display you how to Flash / Install Firmware Samsung GALAXY V PLUS Using ODIN v3.Eleven.1. If you need to improve your Samsung GALAXY V PLUS firmware, we advocate the use of Samsung’s own utilities OTA (Over-the-air) or Samsung Kies. Comply with this manual best in case you apprehend about risks concerned in flashing your Samsung GALAXY V PLUS tool.

This tool is released on 2015, December. Samsung GALAXY V PLUS is the phone with 4,zero Inch TFT capacitive touchscreen, 16M hues, work on Android OS, v4.Four.2 (KitKat), Supported with Dual-middle 1.2 GHz CPU, combined with 4 GB of RAM and three MP of Main digital camera and no secondary digital camera.

Pre Requisite.

Below are the following things you must do before flashing your Android Samsung Smartphone tool.
  1. Make positive your Samsung GALAXY V PLUS is completely charged. Or minimal has ninety nine% of battery potential. It will keep away from the flashing process failure.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing tool.
  3. Make sure you have got installed a trendy of the Samsung motive force, that aid along with your tool If you do not have, you could download here
  4. Original USB cable driver in your Samsung GALAXY V PLUS.
  5. Download Odin V3.Eleven.1, Here
  6. Download Official firmware report for the model quantity of your tool, down load it from - SamMobile, or you could visit samsung-updates.Com/
  7. Or you may study Guide How to Download Official Samsung Firmware From SamMobile. Here
  8. Firmware Samsung GALAXY V PLUS, you should Log In to download firmware via this hyperlink.
    • SM-A710F - Thailand, Malaysia, Indonesia, Vietnam, Cambodia, Sri Lanka, Bangladesh, Nepal, - Here

Guide To Flash Samsung GALAXY V PLUS

  1. You have to download all necessary file. (Samsung USB motive force and Odin)
  2. Then, install all driving force on your laptop or PC.
  3. Extract Odin V3.Eleven.1. File within the vacation spot folder.
  4. Switch Off your Samsung GALAXY V PLUS to start flashing manner.
  5. Then, run Odin3 v3.11.1 by using right click on on Odin.Exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY V PLUS
  6. When the program is jogging, now you can click AP, and navigate to the *.tar or *.Tar.Md5 firmware document.
    Flash Stock Firmware On Samsung GALAXY V PLUS
  7. Now your firmware file has been inserted in Odin3
    Flash Stock Firmware On Samsung GALAXY V PLUS
  8. Then, Enter download mode your Samsung GALAXY V PLUS. See this guide how to do it.
  9. On this mode, now join your Samsung GALAXY V PLUS to your PC / computer using a USB cable.
  10. After your phone connected, you'll see a message seem that display your device added and there's info at the ID: COM at pinnacle left corner. Keep in mind for this COM vary relying at the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Port Com Samsung GALAXY V PLUS
  11. Make positive re-partition is NOT ticked
  12. When the whole thing already you could click Start Button. at the lowest left corner
  13. Just look forward to the method to run approximately 2-5 minutes, and make sure there is no interference on this procedure.
  14. When complete it's going to show a notification PASS and your smartphone Samsung GALAXY V PLUS will robotically restart.
  15. Wait on your device to boot up, it's going to take some time.
  16. When your Samsung GALAXY V PLUS is prepared to use, now take a look at your firmware model. See this guide how to test it.
  17. Finish.

Comments

Popular posts from this blog

Download Mi Flash Tools v2017.4.25.0 exe

Cara Hard Reset Tablet Advan i7D Bima

How to Install TWRP Recovery and Root Lenovo A319.