Guide to Flash / Install Firmware Samsung GALAXY S7 Using ODIN v3.11.1.

Guide to Flash / Install Firmware Samsung GALAXY S7 Using ODIN v3.Eleven.1.

Flash Stock Firmware Samsung Galaxy S7. If you want to upgrade your Samsung Galaxy S7 firmware, we advocate the use of Samsung’s very own utilities OTA (Over-the-air) or Samsung Kies. Observe this manual simplest if you recognize approximately dangers worried in flashing your Samsung Galaxy S7 tool. On this manual, we flash Samsung device the use of ODIN v3.Eleven.1.


This device is launched on 2016, March. Samsung Galaxy S7 is the cellphone with five,1 Inch Super AMOLED capacitive touchscreen, 16M colours, paintings on Android OS, v6.Zero (Marshmallow), Supported with Quad-middle (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4000 MB of RAM and 12 MP of Main digital camera and five MP on secondary digicam.

Preparation.

Below are the following things you have to do before flashing your Android Samsung Smartphone tool.

1. Make certain your Samsung Galaxy S7 is absolutely charged. Or minimum has 88 % of battery potential. It will avoid the flashing manner failure.
2. Flashing technique will delete or wipe all records saved in inner memory. So, consider to backup all information earlier than flashing device.
3. Make positive you've got mounted a state-of-the-art of the Samsung driver, that support with your device If you do not have, you could down load here
4. Original USB cable driving force in your Samsung Galaxy S7.
5. Download Odin V3.Eleven.1, Here
6. Download Official firmware report for the model variety of your device, download it from - SamMobile, or you could go to samsung-updates.Com/
7. Or you could examine Guide How to Download Official Samsung Firmware From SamMobile. Here
8. Firmware Samsung Galaxy S7, you need to Log In to down load firmware via this link.
• SM-G930F (GALAXY S7) - Global. Here
• SM-G930FD - Southeast Asia Here
• SM-G930T - T-Mobile. Here .

Guide To Flash Samsung GALAXY S7

1. You need to download all necessary record. (Samsung USB driver and Odin)
2. Then, installation all driving force in your pc or PC.
3. Extract Odin V3.11.1. Record within the vacation spot folder.
4. Switch Off your Samsung Galaxy S7 to begin flashing manner.
5. Then, run Odin3 v3.11.1 with the aid of right click on Odin.Exe and select Run as Administrator.

   Flash Stock Firmware On Samsung GALAXY S7

6. When the program is strolling, now you can click AP, and navigate to the *.tar or *.Tar.Md5 firmware file.
7. Now your firmware report has been inserted in Odin3
8. Then, Enter download mode your Samsung Galaxy S7. See this guide the way to do it.
9. On this mode, now connect your Samsung Galaxy S7 for your PC / computer the use of a USB cable.
10. After your cellphone related, you'll see a message seem that display your device delivered and there is information at the ID: COM at pinnacle left corner. Keep in thoughts for this COM vary relying at the PC / Laptop. Just Ignore all, on this picture you will see that your tool is detected on (COM five)

    Port Com Samsung GALAXY S7

11. Make positive re-partition is NOT ticked
12. When everything already you could click Start Button. at the bottom left corner
13. Just look forward to the technique to run about 2-5 minutes, and ensure there is no interference on this manner.
14. When whole it's going to show a notification PASS and your smartphone Samsung Galaxy S7 will robotically restart.
15. Wait for your tool besides up, it's going to take some time.
16. When your Samsung Galaxy S7 is prepared to use, now take a look at your firmware version. See this guide how to check it.
17. Finish.