Guide - How to Flash Stock Firmware on Android Lenovo Vibe P1m.

Guide - How to Flash Stock Firmware on Android Lenovo Vibe P1m.

Flash Stock Firmware Lenovo Vibe P1m . guidebelajar in this guide will display you the way to flash stock Firmware on Lenovo Vibe P1m, You can comply with this manual if you have downloaded and mounted any custom ROM to your Lenovo Vibe P1m, And you want to revert returned to the unique version Android operating machine which got here out of the field. On this guide required your Lenovo Vibe P1m has root get entry to. So, earlier than you continue flash in this Android device you need to root it first. Please watch out, that rooting and flashing custom ROMs outcomes breaking the warranty of Lenovo Vibe P1m tool. Guidebelajar isn't answerable for any cellphone damage which is incurred at some stage in Custom ROMs flashing process.

Lenovo Vibe P1m is tool released in 2015, September. Comes with Android OS, v5.1 (Lollipop) and supported with Mediatek MT6735P, Quad-core 1.Zero GHz Cortex-A53 CPU, GPU Mali-T720MP2, mixed with 2 GB of RAM and eight MP of Main camera and 5 MP on secondary digicam.

Prepare this earlier than flash Lenovo Vibe P1m.

  1. Make positive you have backup all information and file stored on Internal memory Lenovo Vibe P1m
  2. Make certain you have got as a minimum 80% of battery capacity
  3. Root your Lenovo Vibe P1m devices, see this guide to root it. Here
  4. Download SP Flash Tool five.1532. Here
  5. Download Lenovo Vibe P1m Stock Firmware. Here
  6. Make positive you have enabled USB Debugging to your Android Lenovo Vibe P1m device.
    • Go to Settings ->Developer Options -> USB Debugging.
    • If Developer Options does no longer appear below the settings menu. You can permit it by means of going to :
      • Settings > About Phone > Device Info and faucet on Build Number for approximately 7-8 times. And then go returned and observe the preceding step.

ROM Description.

  1. ROM Version : S025_150924
  2. Android Version: 5.1
  3. ROM Type: VIBE UI
  4. ROM Author/ credits: Lenovo Forums
  5. Feature: All Stock Features
  6. ROM Bit: 64

Guide to Install Stock ROM on Lenovo Vibe P1m.

  1. You must download SP Flash Tools and the custom ROM from the down load hyperlink above.
  2. Then, extract SP Flash device and TWRP recovery on the unique folder to your computer, we advocated you extract it at the laptop.
  3. Then remove your Sim card and SD Card if mounted.
  4. Next, Connect your Lenovo Vibe P1m to Computer, whilst maintaining the power button and extent up . The PC will hit upon the new hardware, simply forget about it.
  5. Open SP flash tool software and click on scatter load . Find Lenovo Vibe P1m scatter garage area in advance. (on the desktop).
    MT6752 scatter
  6. In the Scatter-Loading field go to the folder where you extracted the Flash Tool and choose target_bin
    Flash / Install Firmware Lenovo VIBE S1.
  7. Then you click on options ->Download -> then check DA DL all with a checksum.
    Flash / Install Firmware Lenovo VIBE S1.
  8. On download tab, make sure you've got decided on download most effective choice from drop-down menu, see below picture.
    Flash / Install Firmware Lenovo VIBE S1.
  9. Then, click the down load button on pinnacle right and connect your Lenovo Vibe P1m with the USB cable in cellphone switch off position.
  10. Flash / Install Firmware Lenovo VIBE S1.
  11. The method will run computerized, and you can see the pink stripe showing download percentage at bellow
  12. When your method entire, you may see a green circle with a tick mark.
    Flash / Install Firmware Lenovo VIBE S1.
  13. Now disconnect your Lenovo Vibe P1m
  14. Then, begin your Lenovo Vibe P1m . (recall, on the first booting it's going to take a long term to begin)
  15. Success. Experience.

Comments

Popular posts from this blog

Download Mi Flash Tools v2017.4.25.0 exe

Cara Hard Reset Tablet Advan i7D Bima

How to Install TWRP Recovery and Root Lenovo A319.