Flash Stock Firmware 10F LG G6 H870 KDZ Method Using LGUP & Uppercut.

Flash Stock ROM 10F LG G6 H870. The following guide will explain the way to remedy boot loop or bricked problem on Android LG G6. Or you could also use this guide to upgrade to the cutting-edge Android version. This is 10F stock firmware, which 10f is the second one professional LG Android 7.Zero Nougat replace for open UE devices. To flash the 10f stock firmware, we need the LGUP and Uppercut.

We know that LGUP device is a brand new flashing device to flash kdz/tot/bin stock ROM format into the LG telephone device. LGUP paintings simplest on Windows Operating System. But, not all LG gadgets are supported by LGUP flash device. Therefore, we need Uppercut. The Uppercut lets in LGUP to immediately work with a ton of different LG smartphone models. So you do not need to be confused to discover unique version documents.

To flash a inventory ROM LG G6 using LGUP device, virtually installation LGUP tool. Then double-click on the uppercut.Exe and LGUP will open and locate your tool automatically. For extra element records you can go to the discussion board-xda-developer here

So, what will we need to flash inventory ROM 10f to LG G6? The following are the requirements.

Requirement.

1. A laptop with Windows OS based.
2. LG's Windows USB drivers. Here
3. LGUP device Here
4. Download Uppercut from Here
5. Download Stock ROM 10f for LG G6.
• H87010f_00_OPEN_EU_OP_0417.Kdz Here

Instruction How to flash LG G6.

1. Make sure all required files above are effectively downloaded on your pc. Then, do the following step.
• Install LG USB Driver
• Install the trendy LG UP software
• Extract or Unzip Uppercut.Zip
2. Then, double-click on the uppercut.Exe earlier than jogging LGUP. Uppercut.Exe calls for LGUP 1.14 (no longer 1.11) mounted at the pc.

uppercut LGUP

3. Now, placed your LG G6 Smartphone into download mode , you may manually do it by using ;
//goo.Gl/Y5SGeF
• Turn Off your LG G6 Smartphone device.
• Then press and hold Volume UP button while connecting your LG G6 Smartphone to the laptop the use of the USB cable.
4. Then run LGUP device.
5. Wait a moment until LGUP locate and apprehend your LG cellphone. This will install a important USB Drivers on your tool.
6. Now, your LGUP ought to show up on your pc display.

Flash LG G6 H870 the use of LGUP

7. From LG UP display above, go to process tab and choose Upgrade.
8. Then click on on BIN document underneath document kind.

Flash LG G6 H870 the use of LGUP

9. Then click the button on the proper facet of bin file shown inside the photo beneath.

Flash LG G6 H870 the use of LGUP

10. This movement will browse your kdz/tot record you just down load.
11. Once your kdz/tot document already inside the LGUP software, now click on Start.

Flash LG G6 H870 the use of LGUP

12. Now, LGUP will start flashing technique, this is indicated on the progress bar.

Flash LG G6 H870 the use of LGUP

13. Just wait till the step on progress bar indicates one hundred% entire. Once it completed LG G6 will routinely reboot
14. Now, you can unplug your LG G6 tool from the computer.